What PPF Is
Paint protection film is a clear, self-adhesive urethane film applied over painted panels to take the abrasion of the road — chips, scratches, and road debris — instead of the paint.
Education first: what paint protection film is, where it goes, and how it differs from glass work — for Rochester drivers. Pro-Stall Auto Glass’s recorded specialty is auto glass; ask the shop about PPF availability for your vehicle.
Window tint, paint protection film, and ceramic coating are explained on this page and its sister chapters so you can ask informed questions. They are not on Pro-Stall Auto Glass’s recorded service list — call the shop at (507) 285-1122 to confirm current availability before counting on any of them.
Automotive window tinting is the first service on Pro-Stall Auto Glass’s own record — cars, trucks, and SUVs, installed right here in Rochester. The right film cools the cabin, cuts glare, protects the interior, and cleans up the look of the vehicle, all within Minnesota’s legal limits.
Paint protection film is a clear, self-adhesive urethane film applied over painted panels to take the abrasion of the road — chips, scratches, and road debris — instead of the paint.
High-impact zones first: front bumpers, hoods, fenders, mirrors, and rocker panels — or full-body coverage for drivers who want the whole vehicle protected.
Pro-Stall Auto Glass’s recorded trade is auto glass — windshields, side and rear glass, power windows, and fleet glass. PPF protects paint, not glass; they answer different questions.
Paint protection film is not on Pro-Stall Auto Glass’s recorded service list — ask the shop about PPF availability for your vehicle, and use this chapter to arrive knowing what to ask.
Paint protection film is not window tint, and Minnesota’s tint limits do not govern it — but drivers mix the two up every week. PPF is clear film for painted panels; tint is film for glass, and Minnesota tint law allows 50% VLT MAX on the front side windows, the rear side windows, and the rear windshield of a car, with no tint material at all on the windshield. The limits below are the tint law, stated in full.
Minnesota law — the tint subdivisions compiled in the WFR tint-law library (Subd. 4). Front side windows: 50% VLT MAX — no side window may be composed of or treated with material with a light transmittance of less than 50 percent plus or minus 3 percent, or a luminous reflectance of more than 20 percent plus or minus 3 percent (Subd. 4(3)). Rear side windows (cars): 50% VLT MAX — the same clause covers any side window, beside or behind the driver (Subd. 4(3)). Rear windshield (cars): 50% VLT MAX — the same clause names the rear window alongside the side windows (Subd. 4(3)). Windshield: no tint material at all — any material that makes the windshield more reflective or in any other way reduces light transmittance through it is barred (Subd. 4(1)); the tint subdivisions allow no top strip. Film marking: material applied after August 1, 1985 must be identified by a permanent marking stating the percentage of transmittance and the percentage of reflectance of the material, readable when installed (Subd. 4(4)). VLT is visible light transmission — the lower the number, the darker the film. We install to legal limits and will walk you through your options before any film goes on.
At Pro-Stall Auto Glass, the conversation starts with your vehicle and how you use it. Call (507) 285-1122 to ask which shade makes sense for daily driving, highway miles, a work vehicle, or a car you plan to keep looking sharp.
Daily commute, highway miles, a new vehicle, a work truck — the right shade follows real use.
The shop walks you through Minnesota’s limits — 50% VLT MAX on the front side windows, the rear side windows, and the rear windshield of a car, and no tint material at all on the windshield — and confirms the legal shade for your vehicle before any film goes on.
The shop checks the glass and any existing film or damage that may affect installation or removal.
The confirmed installation is completed, then you review the finished vehicle and the care instructions.
Fresh film needs time to cure — a hazy look and small water pockets are normal while it dries. Follow the aftercare guidance the installer gives you for your exact film.
The things drivers ask most after fresh film goes on.
Minnesota's rule is laid out in the tint law band above: 50% VLT MAX on the front side windows, the rear side windows, and the rear windshield of a car — and no tint material at all on the windshield. We'll confirm the legal shade for your vehicle before any film goes on.
Follow the aftercare guidance provided by the installer. Cure time can vary with the film and the weather, so the shop will give you the right timing for your installation.
A hazy look and small water pockets are a normal part of curing — the film is applied wet, and the moisture works its way out as it dries. It clears on its own over the curing period. Don't press on the bubbles; let them dry out.
Automotive window film is normally installed on the inside surface of the glass, where it is protected from weather and road debris.
Use a soft microfiber cloth and a tint-safe cleaner. Avoid abrasive tools, and ask the installer which products they recommend for your specific film.
Yes. The shop can help you balance appearance, privacy, heat control, visibility, and Minnesota's tint laws before installation.
Tell us what you're driving — or what room you're tired of squinting in — and we'll get back to you with a quote. Prefer to talk? Call the shop.
Thanks — Pro-Stall Auto Glass will get back with you shortly.
Urgent? Call (507) 285-1122.
You can also find Pro-Stall Auto Glass on:
Pro-Stall Auto Glass is a proud member of Window Film Revolution — WFR FOR MY CAR — a growing network of independent, locally owned tint shops across America. One standard of work, one family of shops, and a local owner who stands behind every install.
Find Out More About WFRWindow tint training is taught hands-on by WFR’s confirmed trainers — in real working shops, on real cars, with real film. Want to learn the trade the right way? Learn it from a trainer in the WFR For My Car training network.
Think you can train? WFR certification is earned by doing — final at a WFR event, or prove it live to a certified trainer. The trainers in the network are the ones who teach.
Find a WFR TrainerBRINGING OUR INDUSTRY TO YOU
From the WFR Paint Protection Film Hub: we follow what’s new in our industry so Rochester drivers and homeowners don’t have to. Here is what’s happening this month — and what it means for you.
NOVEMBER 2026 · INDUSTRY NEWS
If a cracked windshield has ever ruined your week, this one’s for you. ClearPlex NC, new from Madico this month, is an exterior windshield film that takes the hit from road debris before your glass does — and because it’s nano-ceramic, it also cuts the heat pouring through the biggest piece of glass on your car: 90% infrared rejection, 99% UV blocked.
NOVEMBER 2026 · INDUSTRY NEWS
The film on your car is only as good as the hands that installed it — which is why training news matters to Rochester customers. Avery Dennison has published its 2027 workshop and certification schedule, with an expanded Safety & Solar Film certification and classes that are 90% hands-on, including new locations near Cincinnati, Seattle and Denver. When you choose a shop, asking about installer training is fair game.
New industry notes are added twice a month. The full stories live on the WFR Wire. More from the Paint Protection Film Hub.
This page is Pro-Stall Auto Glass’s chapter of the WFR Paint Protection Film Hub — see the shop’s full member page on WFR For My Car.
More WFR hubs: Skin & Where It Goes · Tesla & EV Tinting · Home & Interior Film · Ceramic Coating · Vehicle Wraps & Color Change · WFR For My Car home
One shop, one web — every page of ours links to every other. Pick your door: