Automotive Window Tinting
Cars, trucks, and SUVs — a cooler cabin, less glare, UV protection for your interior, and a cleaner look, installed to Georgia's legal limits.
What We Do
Automotive tint, glass service, and detailing — right here in Rossville.
Automotive Glass Service
Auto glass service from the same crew that tints your car — glass work done right, right here in Rossville.
Auto Detailing
Full auto detailing — interiors and exteriors cleaned and brought back, so the whole car looks as sharp as the glass.
Georgia Tint Law — Know Before You Tint
28% VLT MAX
Front side windows
15% VLT MAX
Rear side windows & rear windshield (passenger cars)
Georgia law — O.C.G.A. § 40-8-73.1, as changed by House Bill 1161 effective July 1, 2026. Front side windows: 28% VLT MAX. Rear side windows and the rear windshield on passenger cars: 15% VLT MAX — each figure carries a ±3% measurement tolerance, and light reflectance may not exceed 20%. Multipurpose passenger vehicles (many SUVs, trucks, and vans) may go darker behind the driver. The windshield may carry only a non-reflective strip in the top 6 inches. VLT is visible light transmission — the lower the number, the darker the film. We install to legal limits and will walk you through your options before any film goes on.
Tint Care Questions
The things drivers ask most after fresh film goes on.
How dark can I legally tint in Georgia?
Georgia's rule is laid out in the tint law band above: 28% VLT MAX on the front side windows, and 15% VLT MAX on the rear side windows and the rear windshield of a passenger car. Qualifying multipurpose passenger vehicles may go darker behind the driver. We'll confirm the legal shade for your vehicle before any film goes on.
How long should I wait before rolling down my windows after tinting?
Follow the aftercare guidance provided by the installer. Cure time can vary with the film and the weather, so the shop will give you the right timing for your installation.
Why does my new tint look hazy or bubbly?
A hazy look and small water pockets are a normal part of curing — the film is applied wet, and the moisture works its way out as it dries. It clears on its own over the curing period. Don't press on the bubbles; let them dry out.
Does window film go on the inside or outside of the window?
Automotive window film is normally installed on the inside surface of the glass, where it is protected from weather and road debris.
How should I clean tinted windows?
Use a soft microfiber cloth and a tint-safe cleaner. Avoid abrasive tools, and ask the installer which products they recommend for your specific film.
Can you help me choose the right shade?
Yes. The shop can help you balance appearance, privacy, heat control, visibility, and Georgia's tint laws before installation.
Get a Free Quote
Tell us what you're driving and we'll get back to you with a quote. Prefer to talk? Call the shop.
